Electric pressure cooker PRESIDENT

The lock against accidental opening does not slip upwards. There are not enough ingredients or liquids in the cooking pot. Add liquid into the cooking pot or increase the amount of food (up to three quarters of the pot volume as a maximum).

The lid closure lock blocks the lock against accidental opening. Repeat the steps of setting the lid on and locking the lid. The Lid text is flashing on the display. The lid is not set correctly on the pressure cooker. Repeat the steps of setting the lid onto the pressure cooker.

A continuous signal sounds while the pressure cooker is operating. The pressure cooker vessel becomes overheated due to deposits on the bottom of the cooking pot and the pressure cooker has automatically decreased temperature. End the running programme and release all steam. Open the pressure cooker and release the deposits attached to the bottom of the cooking pot.

Subtle cracking sounds are heard from the pressure cooker during operation. The outer surface of the cooking pot is wet.

Make sure before each use that the outer surface of the cooking pot and the surface inside the pressure cooker vessel are dry and clean. If this is not the case, end the running programme, let the pot with food cool down and clean and dry the outer surface and the surface inside the pressure cooker vessel.

LIST OF ERROR MESSAGES The display may show the following error messages in exceptional cases: Err1/Err2 Temperature sensor error. Contact a TESCOMA service centre; for contact details visit www.tescoma.com.

Err3 Permitted temperature exceeded – the cooking pot is not positioned correctly in the pressure cooker or there are not enough liquids in the cooking pot. Position the cooking pot correctly in the pressure cooker vessel or add liquid (up to three quarters of the cooking pot capacity as a maximum).

Err4/Err5 Operating valve error (high/low pressure). Contact a TESCOMA Service centre; for contact details visit www.tescoma.com.

17