Cookware Ultima

SAUCEPAN ULTIMA Four pluses for cooking

1. NO HOLE FOR STEAM Reaching boil quickly and warming up food while saving energy.

To reach boiling point quickly and to warm up food while saving energy, place the cover onto the saucepan so that the protruding end of the handle of the cover with the mark is directed to the long handle of the saucepan (pic. 7). Set the cooker to medium or higher output. Once the generated steam begins to escape under the stainless steel rim of the cover, turn the cover so that the protruding end of the handle of the cover with the (pic. 8) mark is directed to the long handle of the saucepan, or reduce the heat output of the cooker.

2. HOLE FOR STEAM Comfortable cooking without overboiling

For comfortable cooking without overboiling, place the cover onto the vessel so that the protruding end of the handle of the cover with the mark is directed to the long handle of the saucepan (obr. 8). Set the cooker to lowor mediumoutput; an amount of steamwhich is sufficient for comfortable cookingwithout overboiling will continuously escape through the hole between the vessel and the cover. 3. SETTING UTENSILS ASIDE Handle for setting kitchen utensils aside Place the cooking spoon, ladle, etc. in the long handle of the saucepan during the cooking process (pic. 9). 4. SETTING THE COVER ASIDE Steam runs back into the vessel Place the cover in the hole in the grip of the vessel during the cooking process; steam runs back into the saucepan (pic. 10). SETTING COOKER OUTPUT When cooking in cookware ULTIMA, set the cooker to maximum only for the initial phase of cooking and allow only low or medium output further during the cooking process. Switch the heat off in advance before the end of cooking to make use of the heat retaining properties of the sandwich bottom. Make sure that the size of the cooking range does not exceed the diameter of the bottomof the cookware and do not allow the flame to expand over the bottom – if this happens, the grips could burn or even suffer damage.

4